Serial Port communications on Mac via Matlab

I have a rev B (Core 2 Duo from Dec, 2006) Apple MacBook Pro laptop running Leopard OS X (version 10.5.2) and have Matlab version (R2007b). I’ve just found that I can NOT use the built-in serial port object, instead, I get the following error:

 java.lang.UnsatisfiedLinkError: no rxtxSerial in java.library.path thrown while loading
??? Error using ==> serial.serial at 57
The serial port object is supported on the Solaris, 32-bit Windows and 32-bit Linux platforms only.

So, to get it successfully working, I downloaded these files: SerialComm.m, SerialComm.mexmac and SerialComm.mexmaci from

You can then use code like this:

 PORT = 1;
% close (if previously open)
SerialComm( 'close', PORT)
% open
% flush the buffers
SerialComm( 'purge', PORT)
% status
SerialComm( 'status', PORT)
% read
STR = SerialComm( 'readl', PORT);
% close
SerialComm( 'close', PORT)

[UPDATE 02 Apr, 2008]: Note, this same code didn’t seem to work on a recently purchased Macbook. Good luck.

[UPDATE 27 Mar, 2009]: I see that in Matlab version 7.8.0 (R2009a) if you go to ‘serial’ in Help docs it now says for Mac OS X and Mac OS X 64 you can use serial(‘/dev/tty.KeySerial1’); I don’t have a way of testing that right now, but it’s possible that you don’t need to use this third party toolkit anymore. If that’s true, please leave a note here.

6 thoughts on “Serial Port communications on Mac via Matlab

  1. Hello, did you ever get it to work with a serial-to-usb convertor? I keep getting the error message ‘SERIALCOMM(‘OPEN’): could not open port’. If you know how to fix it, please let me know. Thanks!

  2. There is a similar toolbox called comm here:

    BUT, there is another way. MATLAB uses the code from the rxtx project ( for its serial port interface for Windows and Linux. This same code can also be compiled for OS X, although it has only recently become stable enough to use. I suspect it will eventually be included in MATLAB. In the meantime, you can do it yourself, if you are not afraid of the terminal:

    1) Install the latest version (2.1-8) from This requires getting the code through cvs.
    2) Install your preferred USB-to-serial kernel extension (I am using the FTDI driver for a Prologix USB controller).
    3) Open the included m-file “serial.m” and comment out the lines that check to see if you are using a Mac (lines 56-58).

    Restart the computer, plug in USB device, start MATLAB. You can now use the “tmtool” and “serial” commands like a normal MATLAB user.
    For example:

    >> tmtool
    >> io=serial(‘/dev/tty.usbserial-PXQDOOHN’)

    Serial Port Object : Serial-/dev/tty.usbserial-PXQDOOHN

    Communication Settings
    Port: /dev/tty.usbserial-PXQDOOHN
    BaudRate: 9600
    Terminator: ‘LF’

    Communication State
    Status: closed
    RecordStatus: off

    Read/Write State
    TransferStatus: idle
    BytesAvailable: 0
    ValuesReceived: 0
    ValuesSent: 0


    Pretty cool… I’m using MATLAB 2007b on Intel Mac, 10.5.4. I don’t pretend it was easy, and I have no idea if it will work on any other system/versions. Good luck!

  3. I am doing my project using Matlab2008a. I am using simulink blocks for designing my model. I have flashed the program i got from my model in PIC18F4550 since it supports USB. i am giving my inputs using controller to the PC. so iam interfacing it using USB. Can u please help me in giving the M file for the matlab to accept the data from controller.

Leave a Reply

Your email address will not be published. Required fields are marked *